MR13-G
- Maximum static load: 2900 kg
- Reduction ratio: 1/52; 1/43;
- Gear weight: 250kg
- Oil capacity: 4.2 l (Shell Omala S4 WE)
- Power range AC2: 5.5 – 7.4 kW 50/60 Hz
Designed for lifting in systems with a capacity of 630 kg.
This design facilitates installation in three separate positions: right, left and vertical.
Technical features:
- extremely compact dimensions, with the option of easily removing the pulley, flywheel and stator motor with braking unit;
- complete range of motors available, either in ACVVVF version – with inverter control capability – or two-speed AC2 version;
- average weight depending on the configuration may be as low as 250 kg;
- forced ventilation motor (as standard) which enable 240 windings/hour for inverter-capable motors (ACVVVF) or 180 windings/hour for two-speed version motors (AC2);
- traction pulleys built using spheroidal cast iron EN-GJS-700-2-UNI EN 1563, a highly resistant material with minimum hardness of 250 HB. Diameters between 520-550 mm;
- provision for incorporating an SSB brake device in accordance with the recent EN 81-80 EN81.1 and A3 guidelines.
- extremely silent, with levels below 60dBA VDI;
- three separate oil level indicators so as to facilitate high-quality inspection from any position; long-lifesynthetic oil provided with the machine (oil capacity = 4.2 lt.)
- electromagnetic braking system with exceptional electric and mechanical features
0 comments:
Post a Comment